FAQ

This section answers frequently asked questions and points out some product features.

Search

Select a topic
show all questions

Recently asked questions

  • Veosys, HTA-DIY-Veosys

    Where is Veosys typically used?

    The hinge was developed for use outdoors and in shipbuilding. Other applications are markets that place high demands on corrosion, such as coastal regions.

  • Veosys, HTA-DIY-Veosys

    Is the Veosys compatible with the Sensys range?

    No, the Veosys range is intended for applications with high demands on corrosion. This means it is not a hinge for broadening the portfolio for standard applications.

  • HTA_DIY_Topfscharniere, HTA-DIY-Scharniere, HTA-DIY-Veosys

    What is the distance for the mounting plates provided?

    Sensys and Intermat concealed hinges always come complete with a cross mounting plate with a distance of 0 mm.

    The distance for SlideOn concealed hinges is 1.5 mm.

  • HTA_DIY_Topfscharniere, HTA-DIY-Scharniere, HTA-DIY-Veosys

    Can the MultiBlue hole marking jig be used for marking all door mounting options?

    No, the template can only be used for concealed hinges in overlay and centre panel mounting applications.

    For inset doors, door thickness must also be added to the 37 mm hole line distance on the cabinet body side.

  • HTA_DIY_Topfscharniere, HTA-DIY-Veosys

    Can soft closing and non soft closing concealed hinges be used in combination with other hinges?

    No, they can't because of their different kinematics.

    Explanation:

    Kinematics describes a door's movement specific to the hinge it is mounted on. Opening doors with multiple pivot hinges requires a side reveal next to the door because the door is first moved sidewards to permit the door hinging movement. Depending on the concealed hinge kinematics, the reveal required may be larger or smaller.